Cincom L12 VII

The Cincom L12 type VII is a state-of-the-art Swiss Turning Center featuring the ALL axis Simultaneous Cincom System M7 Control (Mitsubishi Meldas 70LPC). The user-friendly editing function, which utilizes multi-line multi-axes programming along with superimposed and synchronized control, makes setting up the most complex jobs easy.

The L12 is equipped with a detachable guide bushing as standard. This allows the machine to be used as a regular guide bushing type automatic lathe for long and small diameter workpieces. Once the guide bushing is removed, it can be used to machine short workpieces with less material waste.

Additional Details

Standard NC functions

  • NC unit dedicated to the L12
  • 8.4″ Color LCD
  • Program storage capacity: 160m
  • Tool offset pairs: 40
  • Product counter indication (up to 8 digits)
  • Spindle speed change detector
  • Constant surface speed control function
  • Automatic power-off function
  • On-machine program check function
  • Chamfering corner R
  • Variable lead thread cutting
  • Arc threading function
  • Geometric function
  • Spindle C-axis function
  • Milling interpolation
  • Back spindle C-axis function
  • Back spindle chasing function
  • Canned cycle drilling
  • High speed rigid tapping function
  • Rigid tapping phase adjustment function
  • Differential speed rotary tool function
  • Tool Life Management I
  • Tool Life Management II
  • External memory program driving
  • User macros
  • Helical interpolation function
  • Inclined helical interpolation function
  • Hob function
  • Polygon function
  • Inch command
  • Sub inch command

Optional NC functions

  • Tool offset pairs: 80
  • Program storage capacity: 600m

Standard Accessories

  • Main spindle chucking device
  • Back spindle chucking device
  • Gang rotary tool driving devices
  • Coolant device (with level detector)
  • Lubricating oil supply unit (with level detector)
  • Machine relocation detector
  • Door lock
  • Workpiece separator
  • Lighting
  • Back rotary tool driving unit
  • Rotary guide bushing device

Optional Accessories

  • Cut-off tool breakage detector
  • Knock-out jig for through-hole workpiece
  • Workpiece conveyor
  • Chip conveyor
  • High pressure coolant device
  • Coolant flow rate detector
  • Signal lamp
  • 3-color signal tower

Optional Tool Header

  • GSE3607: 3 Front / 3 Back rotary tool holder (0~30° adjustable)
  • GSS1530: Back slitting spindle (up to 30mm diameter cutter)


ITEML12-1M7 (L12VII)
Maximum machining diameter (D)∅ 12 mm
Maximum machining length (L)GB: 135mm/1 chuck; NGB: 30mm/1 chuck
Maximum front drilling diameter∅ 8 mm
Maximum front tapping diameter (tap, die)M6
Spindle through-hole diameter∅ 20 mm
Maximum main spindle speedGB 15,000 rpm; NGB 12,000 rpm
Maximum chuck diameter of back spindle∅ 12 mm
Max. part length for front ejection to standard part separator80 mm
Max. protrusion length of back spindle workpiece30 mm
Max. drilling diameter for back spindle∅ 6 mm
Max. tapping diameter for back spindleM5
Back spindle speedMax. 10,000 rpm
Gang rotary tool: Maximum drilling diameter∅ 5 mm
Gang rotary tool: Spindle speed Max.10,000 rpm
Back tool post rotary tool: Maximum drilling diameter∅ 5 mm
Back tool post rotary tool: Maximum tapping diameterM4
Back tool post rotary tool: Spindle speedMax. 9,000 rpm
Number of mountable toolsMaximum 28
Gang tool post6
Gang rotary tools4 Stations (1 built-in/3 quill)
Gang drilling toolFront 4, Back 4
Back tool post4
Tool size: Tool3/8″ square shank
Tool size: Sleeve3/4″ diameter shank
Main spindle collet chuckTF16
Guide bushingSD125R
Back spindle collet chuckTF16
Rapid feed rate(all axes) 35m/min
Motors: Spindle drive2.2/3.7 kW
Motors: Gang tool post rotary tool drive0.75 kW
Motors: Back spindle drive0.4/0.75 kW
Motors: Back tool post rotary tool drive0.5 kW
Motors: Lubricating oil0.25 kW
Center height39″ (1000 mm)
Input power capacity6.1 kVA
Air pressure and air flow rate for pneumatic devices0.5 MPa. 60NL
Weight3,748 lbs (1700 kg)

L12VII Floor Layout

Maximum height: 1,610 mm (63.4″) including mount

A and L dimensions vary depending on bar feeder type

All specifications are subject to change without prior notice.

This product is subject to the export control laws of the United States and other countries. A license may be required prior to export, re-export or transfer of these products. Contact us for further information.

Terms & Conditions